Conductive 3D Printer Filament 1.75 / 3.0mm
1, Specifications are 1.75,3.0.
2, color only black
3, Vacuum packaging, weighing 1.0KG.
4, In the operation of the electronics industry, a static spark
tamper with sophisticated electronic
components can cause serious damage, as the effective release and
prevent static electricity generation,
it is necessary to use a conductive ABS products.
5, The finished surface resistivity in 103-105.
6, conductive ABS high rigidity, large product does not have
7, Working temperature 230-270 degrees.
Advsntages: Conductive electricity
Disaavantages: Can do only Black color.
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use
recycled material or regrind material, and all had achieved the
latest REACH certificate.
2, Before the mass production, our engineer always do the test to
make sure that sure that each batch of new raw materials must be
printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right range of 1.75 / 3.0mm, and our
engineer will adjust it immediately when it alarms to indicate of
wrong size, and this unqualified filament will be cut off and never
4, We to keep the filaments dry, each roll of filament is packed in a
vacuumed poly bag with a desiccant inside of it.
Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it,
package, every Tray into a small box, and the each 8 small box into
a master carton.
4,Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the
35.8×35.8×22.5cm Diameter 200mm, axle hole 56mm, overall height
70mm. the corresponding carton 43.5×43.5×18cm